Front-wheel drive, Talk:Front-wheel drive
, Category:Front wheel drive vehicles
, Category talk:Front wheel drive vehicles
, Category:Front wheel drive sports cars
, Category talk:Front wheel drive sports cars
is the most common form of engine
layout used in modern passenger car
s, where the engine drives the front wheel
s. Most front wheel drive vehicles today feature transverse
engine mounting, where as in past decades engines were mostly positioned longitudinal
ly instead. Rear-wheel drive
was the traditional standard and is still widely used in luxury cars and most sport cars. Four-wheel drive
is also sometimes used. See also FF layout
Experiments with front wheel drive cars date to the early days of the automobile. Following the Spanish American War, J. Walter Christie
of the USA
was working on designs for a front-wheel-drive car, which he promoted and demonstrated by racing at various speedways in the US, and even competed in the Vanderbilt Cup
and the French Grand Prix
. In 1912 he began manufacturing a line of wheeled fire engine tractors which utilized his front-wheel-drive system, but due to lack of sales this venture failed. Alvis Cars
of the United Kingdom
introduced a front wheel drive model in 1928, but it was not a success. Neither was the big Cord
L-29 of 1929 in the United States
The first successful models were the 1931 DKW
F1 in Germany, the 1934 Traction Avant
cars from Citroën
in France, the British BSA Three-wheelers and Cars made in Birmingham from 1930 to the outbreak of World War 2 in 1939, and the contemporary 810
from Cord Automobile
in the United States. These vehicles featured a mid-engine design
— the engine was behind the transmission and ran "backwards", save for the Cord, which drove the transmission from the front of the engine.
This layout allows sharp turning circles, but can also make the car quite long. The weight distribution from this layout creates positive handling characteristics due to its low polar inertia and relatively favorable weight distribution (the heaviest component is near the center of the car, making the main component of its moment of inertia relatively low).
Front wheel drive was further popularised by the 1948 Citroën 2CV
, where the lightweight aluminum flat twin
engine was mounted ahead of the front wheels, and 1955 Citroën DS
, featuring the mid-engine
layout. Also, Panhard
in France, DKW
in Germany and Saab
in Sweden offered only front wheel drive cars.
The transversely mounted engine combined with front wheel drive was popularised by the Mini
of 1959; there the transmission was built into the sump
of the engine, and drive was transferred to it via a set of primary gear
s. The same transmission concept was also used by Peugeot
on their jointly-developed small car engine of the 1970s where the 4 cylinder block was canted over to reduce the overall height of the engine with the gearbox underneath. The tendency of this layout to generate unwanted transmission "whine" has seen it fall out of favor, except at Saab. The first-generation Saab 900
used a longitudinal engine with gearbox underneath with helical gears but the thrust bearings
involved gave out a characteristic "zing" sound almost like a hairdryer
pioneered the "U-Drive" layout where the engine is mounted longitudinally, in an "overhung" position over the front wheels. Also in the 1970s and 80s the Douvrin
large 2.0, 2.2 and 2.6 engines used in the larger Renaults (20, 21, 25 and 30) used this longitudinal "forward" layout. Audi is one of the few manufacture
rs which still uses this particular configuration. It allows the use of equal-length half shaft
s and the easy addition of all-wheel drive
, but has the distinct disadvantage that it makes it difficult to achieve 50/50 weight distribution - one reason why Audi vehicles have not managed to match the dynamic prowess of BMW
, who have tenaciously stuck with the conventional rear wheel drive layout for all its vehicles.
In the German
market, premium vehicles developed advanced independent suspension
designs for the rear wheels and thus never switched away from rear wheel drive.
front wheel drive and all wheel drive layouts are derived from the standard longitudinal front engine/rear drive transmission configuration, however the differential for the front wheels is between the bell housing
and the transmission. Visually, the front CV axles come out of the sides of the bellhousing, directly behind the clutch/torque converter area. The engine sits entirely in front of the front axle centerline, however, the short fore-aft length of the boxer engine allows this configuration without any weight distribution issues.
The 1966 Oldsmobile Toronado
was the first U.S. made front wheel drive car since the Cord. It used a longitudinal engine placement for its V8, coupled with an unusual "split" transmission, which turned the engine power 180 degrees. Power then went to a differential mounted to the transmission case, but separately oiled. Thereafter to the wheels, using conventional half-shafts. The driveline was set fairly at centerpoint of the wheels, therefore, for better weight distribution, though this put the engine relatively high, necessitating lowered intake systems.
The Toronado's cousin, the Cadillac Eldorado
, with front wheel drive introduced in 1967, holds the record for the largest engine in a front wheel drive production vehicle, at 8.2L/500in³ (starting with the 1970 model, lasting through the 1976 model year). The Cadillac Eldorado continued to be the only front wheel drive offering from Cadillac until 1980, when the Cadillac Seville
was retooled into a front wheel drive sedan, utilising the same chassis as the Eldorado. Reasons cited for the enormous engine are smoothness due to the inertia of the engine soaking up much of the vibration caused by low milling tolerances of the era, resulting in a very smooth ride. As well as bragging rights, as befits the character of such cars.
In acceleration, the Dodge SRT-4
holds the world record for the quickest front wheel drive production vehicle. A turbocharged Citroën SM
broke the land speed record for its class at Bonneville Salt Flats
in 1987, going 202mph (325km/h), a record for a front wheel drive vehicle.
The Corporate Average Fuel Economy
standard drove a mass changeover of cars in the US to front wheel drive beginning in the 1980s, with the introduction of the compact Chevrolet Citation
, and the 1986 introduction of the Ford Taurus
bringing front wheel drive to prominence in mid-size cars. By the mid 1980s, most formerly rear wheel drive Japanese models were front wheel drive, and by the mid 1990s, most American brands only sold a handful of rear wheel drive models.
Making this change easier was the fact that U.S. manufacturers had invested relatively little in the rather expensive and complex task of developing modern rear-wheel drive independent suspension
layouts. Detroit's "Big Three" enjoyed a remarkable run of 75 low-cost years building passenger cars with the live rear axle
design first seen on the Ford Model T
. Some suggest that the introduction of the modern Volkswagen Rabbit
in 1975, from a mainstream U.S. competitor, served as a useful wake-up call for the "Big Three." Chrysler's vehicle lineup was almost entirely front wheel drive by the end of the 1980s. GM followed Chrysler in the mid-1990s, with the exception of the Corvette and F-body lineup.
The vast majority of front wheel drive vehicles today use a transversely mounted engine
with "end-on" mounted transmission, driving the front wheels via driveshafts linked via constant velocity (CV) joints
. This configuration was made popular by the Fiat 128
of 1969. The 1959 Mini, while a pioneering transverse front wheel drive vehicle, used a substantially different arrangement with the transmission in the sump of the engine.
American auto manufacturers are now shifting some expensive models back to rear-wheel drive. The Chrysler 300
and most of the Cadillac
lineup are examples of cars first offered as rear wheel drive, then front wheel drive, and now rear- or all-wheel drive. Horsepower is increasing and many engineers feel the rear wheel drive layout is better in cases of significant weight transfer associated with high powered engines and rapid acceleration.
Advantages of front wheel drive
* Interior space: Since the powertrain
is a single unit contained in the engine compartment of the vehicle, there is no need to devote interior space for a driveshaft
tunnel or rear differential
, increasing the volume available for passengers and cargo.
* Cost: Fewer components overall
* Weight: Fewer components mean lower weight
* Improved fuel efficiency
due to less weight
* Improved drivetrain efficiency: the direct connection between engine and transaxle reduce the mass and mechanical inertia
of the drivetrain compared to a rear-wheel drive vehicle with a similar engine and transmission, allowing greater fuel economy
* Assembly efficiency: the powertrain can often be assembled and installed as a unit, which allows more efficient production.
* Slippery-surface traction: placing the mass of the drivetrain over the driven wheels improves stand-still traction
on wet, snowy, or icy surfaces, although heavy cargo can be beneficial for traction on rear-wheel drive
* Predictable handling characteristics: front-wheel drive cars, with a front weight bias, tend to understeer
at the limit, which is commonly believed to be easier for average drivers to correct than terminal oversteer
, and less prone to result in fishtailing
or a spin.
* Better crosswind stability.
* Tactile feedback via the steering wheel informing driver if a wheel is slipping.
* Front wheel drive allows the use of left-foot braking
as a driving technique. However this mostly applies to rally cars.
* While driving on snow or ice, the skilled driver can control the movement of the car even while skidding by steering, throttling and pulling the hand brake (given that the hand brake operates the rear wheels as in most cases, with early SAAB:s being a exception). It takes practice to master but it vastly increases safety while driving in cold environments, given that the driver understands the risks involved in intentional skidding.
* Front wheel drive wears down the front tires first so you don't have to switch tires to get the best tires in the rear.
Disadvantages of front wheel drive
* The center of gravity
of the vehicle is typically farther forward than a comparable rear-wheel drive layout. In front wheel drive cars, the front axle typically supports around 2/3rd of the weight of the car (quite far off the "ideal" 50/50 weight distribution). This is a contributing factor in the tendency of front wheel drive cars to understeer
can be a problem on front wheel drive cars with higher torque engines ( > 210 N·m ) and transverse layout. This is the name given to the tendency for some front wheel drive cars to pull to the left or right under hard acceleration. It is a result of the offset between the point about which the wheel steers (which falls at a point which is aligned with the points at which the wheel is connected to the steering mechanisms) and the centroid of its contact patch
. The tractive force acts through the centroid of the contact patch, and the offset of the steering point means that a turning moment about the axis of steering is generated. In an ideal situation, the left and right wheels would generate equal and opposite moments, cancelling each other out, however in reality this is less likely to happen. Torque steer is often incorrectly attributed to differing rates of twist along the lengths of unequal front drive shafts. However, Center-point steering geometry can be incorporated in the design to avoid torque steer. This is how the powerful Citroën SM
front-wheel drive car avoided the problem.
*Lack of weight shifting
will limit the acceleration of a front wheel drive vehicle. In a vehicle the weight shifts back during acceleration giving more traction to the rear wheels. This is the main reason why nearly all racing cars are rear wheel drive. However, since front wheel cars have the weight of the engine over the driving wheels the problem only applies in extreme conditions.
* In some towing situations front wheel drive cars can be at a traction disadvantage since there will be less weight on the driving wheels. Because of this, the weight that the vehicle is rated to safely tow is likely to be less than that of a rear wheel drive or four wheel drive vehicle of the same size and power.
* Due to geometry and packaging constraints, the CV joints (constant-velocity joint
s) attached to the wheel hub have a tendency to wear out much earlier than the universal joint
s typically used in their rear wheel drive
counterparts. The significantly shorter drive axles on a front wheel drive car causes the joint to flex through a much wider degree of motion, compounded by additional stress and angles of steering, while the CV joints of a rear wheel drive car regularly see angles and wear of less than half that of front wheel drive vehicles.
* The driveshafts may limit the amount by which the front wheels can turn, thus it may increase the turning circle of a front wheel drive car compared to a rear wheel drive one with the same wheelbase.
* All wheel drive
* Rear wheel drive
* FR layout
* FMR layout
* MF layout
* FF layout
* RMR layout
* http://mywebpages.comcast.net/cvetters3/test1.htm What's It Like To Drive
— describes a test between two Dodge Daytona
s, one FWD and one RWD*Category:Automobile layoutsCategory:Automotive technologiesde:Frontantriebit:Trazione anteriorehe:הנעה קדמיתnl:Voorwielaandrijvingpl:Napęd przednisv:Framhjulsdriftzh:前轮驱动